Możliwości
a simplistic login/logout script, mainly for development of user-customizable pages.
<?php
session_start();
$autorized = false;
if(isset($_GET['logout']) && ($_SESSION['auth'])) {
$_SESSION['auth'] = null;
session_destroy();
echo "logging out...";
}
if(isset($_SERVER['PHP_AUTH_USER']) && isset($_SERVER['PHP_AUTH_PW'])) {
$user = test;
$pass = test;
if (($user == $_SERVER['PHP_AUTH_USER']) && ($pass == ($_SERVER['PHP_AUTH_PW'])) && ($_SESSION['auth'])) {
$authorized = true;
}
}
if (isset($_GET["login"]) && (! $authorized)) {
header('WWW-Authenticate: Basic Realm="Login please"');
header('HTTP/1.0 401 Unauthorized');
$_SESSION['auth'] = true;
print('Login now or forever hold your clicks...');
exit;
}
?>
<h1>you have <? echo ($authorized) ? '' : 'not'; ?> logged!</h1>
<?
?>
Uwierzytelnianie HTTP w PHP
Uwierzytelnianie HTTP jest obsługiwana przez PHP tylko wtedy, gdy PHP pracuje jako moduł Apache'a, nie jest dostępna w trybie CGI. W skrypcie można użyć funkcji header() by wysłać do przeglądarki komunikat "Wymagana autoryzacja", co spowoduje wyświetlenie okienka z polami Użytkownik i Hasło. Po wypełnieniu przez użytkownika tych pól, URL zawierający skrypt PHP zostanie ponownie wywołany z ustawionymi predefiniowanymi zmiennymi PHP_AUTH_USER, PHP_AUTH_PW i AUTH_TYPE zawierającymi odpowiednio nazwę użytkownika, hasło i typ autoryzacji. Zmienne te będą dostępne w tablicach $_SERVER oraz $HTTP_SERVER_VARS. Obecnie obsługiwane są autoryzacje typu "Basic" i "Digest" (od PHP 5.1.0). Więcej informacji znajdziesz w opisie funkcji header().
Informacja: Notatka dotycząca wersji PHP
Zmienne superglobalne, takie jak $_SERVER, udostępniono w PHP » 4.1.0.
Przykładowy skrypt wymuszający autoryzację klienta:
Example #1 Uwierzytelnianie Basic HTTP
<?php
if (!isset($_SERVER['PHP_AUTH_USER'])) {
header('WWW-Authenticate: Basic realm="My Realm"');
header('HTTP/1.0 401 Unauthorized');
echo 'Tekst do wysłania, jeśli użytkownik wciśnie przycisk Anuluj';
exit;
} else {
echo "<p>Hej {$_SERVER['PHP_AUTH_USER']}.</p>";
echo "<p>Twoje hasło to {$_SERVER['PHP_AUTH_PW']}.</p>";
}
?>
Example #2 Przykład uwierzytelnianie Digest HTTP
Ten przykład pokazuje jak zaimplementować proste umierzytelnianie Digest HTTP. Po więcej informacji przeczytaj » RFC 2617.
<?php
$realm = 'Zastrzeżona strefa';
//user => password
$users = array('admin' => 'mypass', 'guest' => 'guest');
if (empty($_SERVER['PHP_AUTH_DIGEST'])) {
header('HTTP/1.1 401 Unauthorized');
header('WWW-Authenticate: Digest realm="'.$realm.
'",qop="auth",nonce="'.uniqid().'",opaque="'.md5($realm).'"');
die('Tekst do wysłania kiedy użytkownik kliknie klawisz anuluj');
}
// analiza zmiennej PHP_AUTH_DIGEST
if (!($data = http_digest_parse($_SERVER['PHP_AUTH_DIGEST'])) ||
!isset($users[$data['username']]))
die('Nieprawidłowe listy uwierzytelniające!');
// tworzenie prawidłowej odpowiedzi
$A1 = md5($data['username'] . ':' . $realm . ':' . $users[$data['username']]);
$A2 = md5($_SERVER['REQUEST_METHOD'].':'.$data['uri']);
$valid_response = md5($A1.':'.$data['nonce'].':'.$data['nc'].':'.$data['cnonce'].':'.$data['qop'].':'.$A2);
if ($data['response'] != $valid_response)
die('Nieprawidłowe listy uwierzytelniające!');
// ok, prawidłowa nazwa użytkownika i hasło
echo 'Jesteś zalogowany jako: ' . $data['username'];
// function to parse the http auth header
function http_digest_parse($txt)
{
// zabezpieczenie przeciwko brakującym informacjom
$needed_parts = array('nonce'=>1, 'nc'=>1, 'cnonce'=>1, 'qop'=>1, 'username'=>1, 'uri'=>1, 'response'=>1);
$data = array();
preg_match_all('@(\w+)=(?:([\'"])([^\2]+)\2|([^\s,]+))@', $txt, $matches, PREG_SET_ORDER);
foreach ($matches as $m) {
$data[$m[1]] = $m[3] ? $m[3] : $m[4];
unset($needed_parts[$m[1]]);
}
return $needed_parts ? false : $data;
}
?>
Informacja: Kompatybilność
Należy uważać z linijkami dodawanymi do nagłówka HTTP. W celu zachowania maksymalnej zgodności ze wszystkimi klientami, słowo Basic powinno zaczynać się dużą literą "B", wartość realm powinna być otoczona cudzysłowami (nie apostrofami), i dokładnie jeden znak odstępu powinien poprzedzać kod 401 w linii HTTP/1.0 401. Parametry autoryzacyjne muszą być oddzielone przecinkami jak pokazano to w przykładzie digest powyżej.
Zamiast wyświetlać wartość PHP_AUTH_USER i PHP_AUTH_PW, jak to zrobiono w powyższym przykładzie, zechcesz zapewne sprawdzić poprawność nazwy użytkownika i hasła. Na przykład poprzez zapytanie do bazy danych lub odnalezienie użytkownika w pliku dbm.
Należy uważać na kapryśne przeglądarki Internet Explorer. Są wrażliwe na kolejność wysyłanych nagłówków HTTP. Wysłanie nagłowka WWW-Authenticate przed HTTP/1.0 401 powinno rozwiązać problem.
Aby zapobiec sytuacji w której ktoś napisze skrypt wykradający hasło wysłane tradycyjnym zewnętrznym mechanizmem, zmienne PHP_AUTH nie będą ustawiane, jeśli dla danej strony aktywna jest autoryzacja zewnętrzna i tryb bezpieczny jest włączony. Bez względu na to, REMOTE_USER może zostać użyte do zidentyfikowania użytkownika autoryzowanego zewnętrznie Zatem, możesz użyć $_SERVER['REMOTE_USER'].
Informacja: Konfiguracja
Aby wykryć czy miała miejsce zewnętrzna autoryzacja, PHP sprwadza obecność dyrektywy AuthType.
Powyższa metoda nie zapobiega jednak wykradaniu haseł do stron wymagających autoryzacji przez kogoś, kto na tym samym serwerze kontroluje strony nie wymagające autoryzacji.
Zarówno Netscape Navigator jak i Internet Explorer opróżnią bufor autoryzacji po otrzymaniu od serwera kodu 401. Można w ten sposób wylogowanić użytkownika i zmusić go do ponownego wysłania nazwy użytkownika i hasła. Tej metody można użyć do wylogowania użytkownika po określonym czasie lub stworzenia przycisku "Wyloguj".
Example #3 Uwierzytelnianie HTTP z wymuszeniem przelogowania
<?php
function authenticate() {
header('WWW-Authenticate: Basic realm="Testowy system autoryzacji"');
header('HTTP/1.0 401 Unauthorized');
echo "Musisz podać poprawny login i hasło by wejść na tę stronę\n";
exit;
}
if (!isset($_SERVER['PHP_AUTH_USER']) ||
($_POST['SeenBefore'] == 1 && $_POST['OldAuth'] == $_SERVER['PHP_AUTH_USER'])) {
authenticate();
} else {
echo "<p>Witaj: {$_SERVER['PHP_AUTH_USER']}<br />";
echo "Poprzednio: {$_REQUEST['OldAuth']}";
echo "<form action='{$_SERVER['PHP_SELF']}' METHOD='post'>\n";
echo "<input type='hidden' name='SeenBefore' value='1' />\n";
echo "<input type='hidden' name='OldAuth' value='{$_SERVER['PHP_AUTH_USER']}' />\n";
echo "<input type='submit' value='Re Authenticate' />\n";
echo "</form></p>\n";
}
?>
Powyższa metoda nie jest wymagana przez autoryzację HTTP typu "Basic", więc nie można na niej polegać. Testy z przeglądarką Lynx pokazały, że Lynx nie usuwa danych o autoryzacji po odebraniu od serwera kodu 401, zatem przejście wstecz a następnie do przodu otworzy stronę, chyba, że wymagania co do danych autoryzacji zmieniły się. Użytkownik może jednak użyć klawisza '_' by usunąc dane o autoryzacji.
Zwóć uwagę, że do wersji PHP 4.3.3, Autoryzacja HTTP nie działała na serwerze Microsoft IIS z PHP w wersji CGI z powodu ograniczeń IIS. Aby zmusić go do działania w PHP 4.3.3+ musisz wyedytować "Bezpieczeństwo katalogów" w konfiguracji IIS. Kliknij na "Edytuj" i zaznacz wyłącznie "Anonimowy Dostęp", wszystkie inne pola powinny pozostać nie zaznaczone.
Inne ogranicznie jest jeśli używasz modułu IIS (ISAPI) i PHP 4, nie możesz wtedy użyć zmiennych PHP_AUTH_* ale zamiast nich, dostępna jest zmienna HTTP_AUTHORIZATION. Na przykład rozważ następujący kod: list($user, $pw) = explode(':', base64_decode(substr($_SERVER['HTTP_AUTHORIZATION'], 6)));
Informacja: Notatka IIS:
Aby Autoryzacja HTTP działała z IIS, dyrektywa PHP cgi.rfc2616_headers musi być ustawiona na 0 (domyślna wartość).
Informacja: Jeśli włączony jest tryb bezpieczny, uid skryptu jest doklejany do pola realm nagłówka WWW-Authenticate.
add a note
User Contributed NotesUwierzytelnianie HTTP w PHP
danja at k0a1a dot net
18-Sep-2008 06:42
18-Sep-2008 06:42
fakeraol at hotmail dot com
02-Sep-2008 11:29
02-Sep-2008 11:29
please remove my other posting, it was just a quickfix.
here is a real solution for both auth-digest-example and the contribution of AlexTM, witch does not work with Internet Explorer:
<?php
function http_digest_parse($digest) {
# edit needed parts, as you want
preg_match_all('@(username|nonce|uri|nc|cnonce|qop|response)'.
'=[\'"]?([^\'",]+)@', $digest, $t);
$data = array_combine($t[1], $t[2]);
# all parts found?
return (count($data)==7) ? $data : false;
}
?>
yaqy at qq dot com
21-Jul-2008 07:38
21-Jul-2008 07:38
<?php
/*
* qq: 290359552
* return string : "error" or array("user","pass");
*/
function auth()
{
if (!isset($_SERVER['PHP_AUTH_USER'])) {
header('WWW-Authenticate: Basic realm="My Realm"');
header('HTTP/1.0 401 Unauthorized');
return "error";
} else {
return array( $_SERVER['PHP_AUTH_USER'] , $_SERVER['PHP_AUTH_PW'] );
}
}
// test:
$au= auth();
print_r( $au );
?>
silkensedai at online dot fr
16-Apr-2008 06:21
16-Apr-2008 06:21
Here is my code for basic authentification login/logout.
Include that code before any of your files:
<?php
function redirect_back($http=true, $html=true, $back=NULL){
if(is_null($back)){
if(isset($_REQUEST['referer'])){
$back = $_REQUEST['referer'];
//}elseif(isset($_SERVER['HTTP_REFERER'])){
// $back = isset($_SERVER['HTTP_REFERER']);
}else{
$back = "index.html";
}
}
if($http) header("Location: $back");
if($html){
$back = htmlspecialchars($back);
print <<<EOF
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<meta http-equiv="refresh" content="0; url=$back">
</head>
<body>
<h1>HTTP/1.0 401 Unauthorized</h1>
<p><a href="$back">Go back</a></p>
</body>
</html>
EOF;
exit();
}
}
$userid = 0;
$username = false;
if(isset($_SERVER['PHP_AUTH_USER']) and $_SERVER['PHP_AUTH_USER']){
$username = $_SERVER['PHP_AUTH_USER'];
$userid = authenticate($username, $_SERVER['PHP_AUTH_PW']);
if($userid===false) $username=false; // login failed
}
// If login succeeded (we have a username) or logout succeeded (no username)
if(isset($_GET['login']) && $username || isset($_GET['logout']) && !$username){
// Go back
redirect_back();
}elseif(isset($_GET['login']) || isset($_GET['logout'])){
// Ask for password
header('WWW-Authenticate: Basic realm=""');
header('HTTP/1.0 401 Unauthorized');
redirect_back(false);
}
?>
You have to test of $username is not false if you want to be sure the user is authenticated.
Example of use in HTML code:
<?php if($username){ ?>
<p>You are logged in with username <?php print htmlspecialchars($username); ?>.</p>
<ul>
<li><a href="?logout&referer=<?php print htmlspecialchars(urlencode($_SERVER['PHP_SELF'])); ?>">logout</a></li>
</ul>
<?php }else{ ?>
<p>You are anonymous.</p>
<ul>
<li><a href="?login&referer=<?php print htmlspecialchars(urlencode($_SERVER['PHP_SELF'])); ?>">login</a></li>
</ul>
<?php } ?>
AlexTM - alextm84 at gmail dot com
13-Mar-2008 01:04
13-Mar-2008 01:04
/* Bug fix of my previous note: a dot was missing */
I have written this code to use the Digest
authentication with PHP on both APACHE
and IIS_ISAPI.
This code fixes the differences between
the two modules.
I hope this will help.
AlexTM - Alessandro Cosci
<?php
session_start();
$realm = 'My Realm';
$logged = false;
//user => password
$users = array('user1' => 'psw1', 'user2' => 'psw2'); // ...
// We need to test which server authentication variable to use
// because the PHP ISAPI module in IIS acts different from CGI
if(isset($_SERVER['PHP_AUTH_DIGEST']))
{
$auth_data = $_SERVER['PHP_AUTH_DIGEST'];
$isapi = false;
}
elseif(isset($_SERVER['HTTP_AUTHORIZATION']))
{
$auth_data = $_SERVER['HTTP_AUTHORIZATION'];
$isapi = true;
}
else
$auth_data = "";
/* The $_SESSION['error_prompted'] variabile is used to ask
the password again if none given or if the user enters
a wrong auth. informations. */
if (
($auth_data == "") ||
(isset($_SESSION['error_prompted']) && $_SESSION['error_prompted']==true)
)
{
$uniqid = uniqid(""); // Empty argument for backward compatibility
$_SESSION['error_prompted'] = false;
header('HTTP/1.1 401 Unauthorized');
header('WWW-Authenticate: Digest realm="'.$realm.
'" qop="auth" nonce="'.$uniqid.'" opaque="'.md5($realm).'"');
die("You're not allowed to access this page.");
}
else
{
// We need to retrieve authentication informations from the $auth_data variable
if(!$isapi)
{
// CGI doesn't add backslashes to the authentication informations
// and doesn't prepend the "Digest " string before username.
// Furthermore it doesn't enclose the "qop" field between double quotes
preg_match('/username="(?P<username>.*)"' .
',\s*realm="(?P<realm>.*)"' .
',\s*nonce="(?P<nonce>.*)"' .
',\s*uri="(?P<uri>.*)"' .
',\s*response="(?P<response>.*)"' .
',\s*opaque="(?P<opaque>.*)"' .
',\s*qop=(?P<qop>.*)' .
',\s*nc=(?P<nc>.*)' .
',\s*cnonce="(?P<cnonce>.*)"/i', $auth_data, $digest);
}
else
{
// ISAP adds backslashes to the authentication informations
// and prependa the "Digest " string before username.
// Furthermore it encloses the "qop" field between double quotes
preg_match('/digest\susername="(?P<username>.*)"' .
',\s*realm="(?P<realm>.*)"' .
',\s*nonce="(?P<nonce>.*)"' .
',\s*uri="(?P<uri>.*)"' .
',\s*response="(?P<response>.*)"' .
',\s*opaque="(?P<opaque>.*)"' .
',\s*qop=(?P<qop>.*)' .
',\s*nc=(?P<nc>.*)' .
',\s*cnonce="(?P<cnonce>.*)"/i', stripslashes($auth_data), $digest);
// Sometimes ISAPI uses qop="auth", and sometimes it uses qop=auth
$digest['qop'] = str_replace("\"", "", $digest['qop']);
}
if (!isset($users[$digest['username']]))
{
$_SESSION['error_prompted'] = true;
die('Username not valid!');
}
else
{
// This is the valid response expected
$A1 = md5($digest['username'] . ':' . $realm . ':' . $users[$digest['username']]);
$A2 = md5($_SERVER['REQUEST_METHOD'].':'.$digest['uri']);
$valid_response = md5($A1.':'.$digest['nonce'].':'.$digest['nc'].':'.
$digest['cnonce'].':'.$digest['qop'].':'.$A2);
if ($digest['response'] != $valid_response)
{
$error_message = 'Wrong Credentials!';
$_SESSION['error_prompted'] = true;
}
else
{
// Ok, valid user/password
echo 'You are logged in as: ' . $digest['username'];
$logged = true;
}
}
}
?>
yuriry at gmail dot com
09-Mar-2008 05:22
09-Mar-2008 05:22
This example did not work for me too. The problem is only the second branch matches. This is why the trimming was required in the previous post. In addition, if there are spaces in the realm name, the second branch truncates the name.
I started from a simple regular expression to at least get the right number of matches:
preg_match_all('@(\w+)=[^,]+,?@',
$txt, $matches, PREG_SET_ORDER);
The next step was to replace [^,]+ with the right sub-patterns to distinguish between quoted and non-quoted values:
preg_match_all('@(\w+)=(?:([\'"])([^\'"]+)(?:\2)|(\w+)),?@',
$txt, $matches, PREG_SET_ORDER);
Branch ([\'"])([^\'"]+)(?:\2) matches quoted values and branch (\w+) matches non-quoted values.
The problem with the first branch is that the middle sub-pattern ([^\'"]+) matches both single and double quotes, and the author definitely intended to use back-references to solve it. Unfortunately, I could not figure out how to use back-references inside a character class. From the documentation it does not seem possible and I ended up duplicating ([\'"])([^\'"]+)(?:\2) branch to deal with single and double quotes separately:
preg_match_all(
'@(\w+)=(?:([\'])([^\']+)(?:\2)|(["])([^"]+)(?:\4)|(\w+)),?@',
$txt, $matches, PREG_SET_ORDER);
The assignment to the $data array in the foreach loop needs to be changed to reflect different number of sub-patterns:
$data[$m[1]] = $m[6] ? $m[6] : ($m[5] ? $m[5] : $m[3]);
Note that no trimming is required and the expression handles spaces in quoted values. It would also be interesting to know if it is possible to use back-references inside a character class.
Lars Stecken
12-Feb-2008 07:23
12-Feb-2008 07:23
To anybody who tried the digest example above and didn't get it to work.
For me the problem seemed to be the deprecated use of '\' (backslash) in the regex instead of the '$' (Dollar) to indicate a backreference. Also the results have to be trimmed off the remaining double and single quotes.
Here's the working example:
// function to parse the http auth header
function http_digest_parse($txt)
{
// protect against missing data
$needed_parts = array('nonce'=>1, 'nc'=>1, 'cnonce'=>1, 'qop'=>1, 'username'=>1, 'uri'=>1, 'response'=>1);
$data = array();
preg_match_all('@(\w+)=(?:([\'"])([^$2]+)$2|([^\s,]+))@', $txt, $matches, PREG_SET_ORDER);
foreach ($matches as $m) {
$data[$m[1]] = $m[3] ? trim($m[3],"\",'") : trim($m[4],"\",'");
unset($needed_parts[$m[1]]);
}
return $needed_parts ? false : $data;
}
Probably there's a more sophisticated way to trim the quotes within the regex, but I couldn't be bothered :-)
Greets, Lars
mt at shrewsbury dot org dot uk
12-Oct-2007 11:28
12-Oct-2007 11:28
On my servers here, the standard rewrite spell
RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization},L]
to set $_SERVER[REMOTE_USER] with digest authentication results in the entire digest being bundled into $_SERVER[REMOTE_USER]
I have used this :
RewriteCond %{HTTP:Authorization} username=\"([^\"]+)\"
RewriteRule .* - [E=REMOTE_USER:%1,L]
And it seems to work successfully.
fordiman at gmail dot com
02-Aug-2007 02:07
02-Aug-2007 02:07
@Whatabrain:
"[E=REMOTE_USER:%{HTTP:Authorization},L] ... didn't work. I couldn't see the variable."
Check $_SERVER['REMOTE_USER'] and $_SERVER['REDIRECT_REMOTE_USER']. It'll be there.
gbelyh at gmail dot com
27-Jul-2007 08:48
27-Jul-2007 08:48
Back to the autherisation in CGI mode. this is the full working example:
# Create the .htaccess file with following contents:
# also you can use the condition (search at this page)
RewriteEngine on
RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization},L]
# In the beginning the script checking the authorization place the code:
$userpass = base64_decode(substr($_SERVER["REDIRECT_REMOTE_USER"],6)) ;
$userpass = explode(":", $userpass);
if ( count($userpass) == 2 ){
#this part work not for all.
#print_r($userpass);die; #<- this can help find out right username and password
list($name, $password) = explode(':', $userpass);
$_SERVER['PHP_AUTH_USER'] = $name;
$_SERVER['PHP_AUTH_PW'] = $password;
}
tonwyatt at yahoo dot com
24-Jul-2007 10:27
24-Jul-2007 10:27
Here is my attempt to create a digest authentication class that will log the user in and out without using a cookie,session,db,or file. At the core is this simple code to parse the digest string into variables works for several browsers.
<?php
// explode the digest with multibrowser support by Tony Wyatt 21jun07
public function explodethedigest($instring) {
$quote = '"';
$equal = '=';
$comma = ',';
$space = ' ';
$a = explode( $comma, $instring);
$ax = explode($space, $a[0]);
$b = explode( $equal, $ax[1], 2);
$c = explode( $equal, $a[1], 2);
$d = explode( $equal, $a[2], 2);
$e = explode( $equal, $a[3], 2);
$f = explode( $equal, $a[4], 2);
$g = explode( $equal, $a[5], 2);
$h = explode( $equal, $a[6], 2);
$i = explode( $equal, $a[7], 2);
$j = explode( $equal, $a[8], 2);
$k = explode( $equal, $a[9], 2);
$l = explode( $equal, $a[10], 2);
$parts = array(trim($b[0])=>trim($b[1], '"'), trim($c[0])=>trim($c[1], '"'), trim($d[0])=>trim($d[1], '"'), trim($e[0])=>trim($e[1], '"'), trim($f[0])=>trim($f[1], '"'), trim($g[0])=>trim($g[1], '"'), trim($h[0])=>trim($h[1], '"'), trim($i[0])=>trim($i[1], '"'), trim($j[0])=>trim($j[1], '"'), trim($k[0])=>trim($k[1], '"'), trim($l[0])=>trim($l[1], '"'));
return $parts;
}
?>
Give it a try at http://tokko.kicks-ass.net/tests/ta1.php Log in with user test password pass or user guest password guest. Go to page two for links to the code. Comments, ideas, suggestions, or critique welcome.
Jack Bates
18-Jul-2007 10:01
18-Jul-2007 10:01
In writing the HTTP auth module for the Gallery project, we discovered the following tricks for logging out with HTTP authentication:
Because most web browsers cache HTTP auth credentials, the Gallery logout link didn't work as expected after logging in with HTTP auth. Gallery correctly logged out the active user but the web browser simply logged in again with the next request.
To work around this, the HTTP auth module listens for the Gallery::Logout event and delegates to the httpauth.TryLogout page if necessary: http://gallery.svn.sourceforge.net/viewvc/gallery
/trunk/gallery2/modules/httpauth/TryLogout.inc?view=markup
The TryLogout page tries clearing the browser's authentication cache by as many tricks possible:
* Ask browser to authenticate with bogus authtype:
GalleryUtilities::setResponseHeader('HTTP/1.0 401 Unauthorized', false);
GalleryUtilities::setResponseHeader('WWW-Authenticate: Bogus', false);
* Redirect with random username and password. This won't actually clear the browser's authentication cache but will replace it with an invalid username and password. Since Gallery ignores invalid HTTP auth credentials, this effectively logs the user out.
* Clear Internet Explorer's authentication cache with JavaScript:
try {ldelim}
{* http://msdn.microsoft.com/workshop/author
/dhtml/reference/constants/clearauthenticationcache.asp *}
document.execCommand("ClearAuthenticationCache");
{rdelim} catch (exception) {ldelim}
{rdelim}
The TryLogout page redirects to the FinishLogout page for two resons:
1. To replace the browser's authentication cache with an invalid username and password
2. To check that the user was indeed logged out. If the user was logged out, the FinishLogout page redirects back to the Gallery application. Otherwise it displays a warning advising the user to manually clear their authentication cache (Clear Private Data in Firefox).
The TryLogout page redirects to the FinishLogout page using JavaScript and falls back on a manual link. It can't use a 302 Found status because the page needs to load for the Internet Explorer JavaScript to execute and because we can't put an invalid username and password in a Location: header.
http://codex.gallery2.org/Gallery2:Modules:httpauth
rovok at web dot de
03-Apr-2007 09:05
03-Apr-2007 09:05
People are encouraged NOT to use register_globals, but Example 34.2. of german PHP documentation (http://de.php.net/manual/de/features.http-auth.php) uses register_globals in their example, assumed that the example is the whole script.
There is a <form> which has an <input> with type = "hidden", a name = "SeenBefore" and a value = "1". The Form is submitted by POST, so $SeenBefore should better be accessed by $_POST['SeenBefore'] instead of $SeenBefore.
Dutchdavey
16-Mar-2007 04:28
16-Mar-2007 04:28
My sincere thanks to: webmaster at kratia dot com 21-Feb-2007 01:53
The principle is to not allow an invalid PHP_AUTH_USER to exist.
The following easy peasy example using Oracle is based on his simple genius:
///////////////////////////////////////////////////////////////
//
// do_html_header
//
// This function outputs the html header for the page.
//
//////////////////////////////////////////////////////////////////
function initialize_session()
{
$err=error_reporting(0);
$connection=oci_connect($_SERVER['PHP_AUTH_USER'],
$_SERVER['PHP_AUTH_PW'],$databasename) ;
error_reporting($err);
if (!$connection)
{
header('WWW-Authenticate: Basic Realm="ZEIP1"');
header('HTTP/1.0 401 Unauthorized');
echo "Login Cancelled';
exit;
}
..
Normal Code..
..
}
Nicolas Merlet - admin(at)merletn.org
05-Mar-2007 06:37
05-Mar-2007 06:37
Be careful using http digest authentication (see above, example 34.2) if you have to use the 'setlocale' function *before* validating response with the 'http_digest_parse' function, because there's a conflict with \w in the pattern of 'preg_match_all' function :
In fact, as \w is supposed to be any letter or digit or the underscore character, you must not forgot that this may vary depending on your locale configuration (eg. it accepts accented letters in french)...
Due to this different pattern interpretation by the 'preg_match_all' function, the 'http_digest_parse' function will always return a false result if you have modified your locale (I mean if your locale accepts some extended characters, see http://fr.php.net/manual/en/reference.pcre.pattern.syntax.php for further information).
IMHO, I suggest you not to use setlocale before having your authentication completed...
PS : Here's a non-compatible setlocale declaration...
setlocale ( LC_ALL, 'fr_FR', 'fr', 'FR', 'french', 'fra', 'france', 'French', 'fr_FR.ISO8859-1' ) ;
webmaster at kratia dot com
21-Feb-2007 01:53
21-Feb-2007 01:53
This is the simplest form I found to do a Basic authorization with retries.
<?php
$valid_passwords = array ("mario" => "carbonell");
$valid_users = array_keys($valid_passwords);
$user = $_SERVER['PHP_AUTH_USER'];
$pass = $_SERVER['PHP_AUTH_PW'];
$validated = (in_array($user, $valid_users)) && ($pass == $valid_passwords[$user]);
if (!$validated) {
header('WWW-Authenticate: Basic realm="My Realm"');
header('HTTP/1.0 401 Unauthorized');
die ("Not authorized");
}
// If arrives here, is a valid user.
echo "<p>Welcome $user.</p>";
echo "<p>Congratulation, you are into the system.</p>";
?>
mg at evolution515 dot net
06-Feb-2007 01:20
06-Feb-2007 01:20
Example for digest doesn't work (at least for me):
use this fix:
--------------
preg_match_all('@(\w+)=(?:(([\'"])(.+?)\3|([A-Za-z0-9/]+)))@', $txt, $matches, PREG_SET_ORDER);
foreach ($matches as $m) {
$data[$m[1]] = $m[4] ? $m[4] : $m[5];
unset($needed_parts[$m[1]]);
}
It's also better to but to put the Auth-Digest-Header in a function and call it on unsuccessful authentification again. Otherwise users only have the chance to submit their username/password just one time.
bleuciell at aol dot com
29-Dec-2006 09:51
29-Dec-2006 09:51
For admin , i repair a fault , all is good now
Sorry for my english
It's a piece of code , to give a piece of reflexion about simple auth , we can also cryp login and pass in db , time is here for non-replay , the code isn't finish , but it work , only for reflexion about auth mechanism
<?php
function ky( $txt,$crypt) { $key = md5($crypt); $cpt = 0; $var = "";
for ( $Ctr = 0; $Ctr < strlen($txt); $Ctr++) { if ($cpt == strlen($crypt)) $cpt = 0;
$var.= substr($txt,$Ctr,1) ^ substr($crypt,$cpt,1); $cpt++; } return $var; }
$key = "";$list = 'abcdefghijklmnopqrstuvwxyz0123456789';
for($i = 0; $i< 200; $i++) { $key .= $list{mt_rand() % strlen($list)}; }
function cryp($txt,$key){ srand((double)microtime()*735412); $crypt = crypt(rand(0,3895234));$cpt = 0;$var= "";
for ( $Ctr=0; $Ctr < strlen($txt); $Ctr++ ) { if ($cpt == strlen($crypt))$cpt = 0;
$var.= substr($crypt,$cpt,1).( substr($txt,$Ctr,1) ^ substr($crypt,$cpt,1) ); $cpt++; } return base64_encode(ky($var,$key) ); }
function dcryp($txt,$key){ $txt=ky(base64_decode($txt),$key);$var= "";
for ( $Ctr = 0; $Ctr < strlen($txt); $Ctr++ ) { $md5 = substr($txt,$Ctr,1);$Ctr++; $var.= (substr($txt,$Ctr,1) ^ $md5); }return $var;}
$time= time(); $user = cryp('bubu',$key); $pwd = cryp('bubu-'.$time.'',$key);
function pwd($j,$key){ $x = dcryp($j,$key); $x = explode('-',$x); return $x[0];}
function pwd2($j,$key){ $x = dcryp($j,$key); $x = explode('-',$x); return $x[1];}
function auth(){$realm="Authentification PHPindex";
Header("WWW-Authenticate: Basic realm='".$realm."'");Header("HTTP/1.0 401 Unauthorized");
echo "Vous ne pouvez accéder à cette page"; }
if( !isset($_SERVER['PHP_AUTH_USER']) && !isset($_SERVER['PHP_AUTH_PW']) ) {auth();
} else {
if( $_SERVER['PHP_AUTH_USER'] == dcryp($user,$key) && $_SERVER['PHP_AUTH_PW'] == pwd($pwd,$key) && $time == pwd2($pwd,$key)) {
echo '';
} else{ auth();}}
?>
Whatabrain
10-Nov-2006 04:05
10-Nov-2006 04:05
Back to the problem of authenticating in CGI mode... mcbethh suggested using this to set a local variable in php:
RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization},L]
It didn't work. I couldn't see the variable. My solution is pretty round-about, but it works:
RewriteEngine on
RewriteCond %{HTTP:Authorization} !^$
RewriteCond %{REQUEST_METHOD} =GET
RewriteCond %{QUERY_STRING} =""
RewriteRule ^page.php$ page.php?login=%{HTTP:Authorization}$1
This causes the Auth string to be added to the URL if there are no parameters and it's a GET request. This prevents POSTs and parameter lists from being corrupted.
Then, in the PHP script, I store the Auth string as a session cookie.
So the only way to log in to my script is to go to the url with no parameters.
admin at isprohosting dot com
01-Nov-2006 03:21
01-Nov-2006 03:21
There are .htaccess which actually works for us (cPanel + phpsuexec) unless others failed. Perhaps it may help someone.
# PHP (CGI mode) HTTP Authorization with ModRewrite:
RewriteEngine on
RewriteCond %{HTTP:Authorization} ^(.*)
RewriteRule ^(.*) - [E=HTTP_AUTHORIZATION:%1]
Then you need small piece of php code to parse this line and then everything will work like with mod_php:
if (isset($_SERVER['HTTP_AUTHORIZATION']))
{
$ha = base64_decode( substr($_SERVER['HTTP_AUTHORIZATION'],6) );
list($_SERVER['PHP_AUTH_USER'], $_SERVER['PHP_AUTH_PW']) = explode(':', $ha);
unset $ha;
}
Enjoy!
SlamJam
24-Oct-2006 08:28
24-Oct-2006 08:28
I used Louis example (03-Jun-2006) and it works well for me (thanks).
However, I added some lines, to make sure, the user does only get the Authentification-Window a few times:
<?php
$realm = mt_rand( 1, 1000000000)."@YourCompany";
$_SESSION['realm'] = $realm;
// In the beginning, when the realm ist defined:
$_SESSION['CountTrials'] = 1;
?>
And then when it comes to check the authentification (ZEND-Tutorial):
<?php
// Not more than 3 Trials
if (!$auth) {
$_SESSION['CountTrials']++;
if ($_SESSION['CountTrials'] == 4) {
session_destroy() ;
header('Location: noentry.php');
exit ;
} else {
header("WWW-Authenticate: Basic realm=".$_SESSION['realm']);
header("HTTP/1.0 401 Unauthorized");
echo 'Authorization Required.';
exit;
}
} else {
echo '<P>You are authorized!</P>';
}
?>
noentry.php is slightely different from comeagain.php.
roychri at php dot net
11-Oct-2006 05:12
11-Oct-2006 05:12
For PHP with CGI, make sure you put the rewrite rule above any other rewrite rule you might have.
In my case, I put this at the top of the .htaccess (below RewriteEngine On):
RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization}]
My symptom was that the REMOTE_USER (or REDIRECT_REMOTE_USER in my case) was not being set at all.
The cause: I had some other RewriteRule that was kickin in and was set as LAST rule.
I hope this helps.
blah at blah dot com
27-Jul-2006 09:46
27-Jul-2006 09:46
Getting PHP Authentication to work with CGI-bin.
You must have mod_rewrite installed for this to work. In the directory (of the file) you want to protect, for the .htaccess file:
# PHP (CGI mode) HTTP Authorization with ModRewrite:
# most right example with header check for non empty:
RewriteEngine on
RewriteCond %{HTTP:Authorization} !^$
RewriteRule ^test.php$ test.php?login=%{HTTP:Authorization}
Change the Rewrite rule to whatever you want it to be. For simplicity, this example only applies to one file, test.php and only if the HTTP Authorization needs to take place.
In the php file:
<?
if (isset($_GET['login'])) {
$d = base64_decode( substr($_GET['login'],6) );
list($name, $password) = explode(':', $d);
echo 'Name:' . $name . "<br>\n";
echo 'Password:' . $password . "<br>\n";
} else {
header('WWW-Authenticate: Basic realm="My Realm"');
header('HTTP/1.0 401 Unauthorized');
echo 'You are not authorized. Bad user, bad!';
exit;
}
?>
You need to get rid of the first 6 characters for some reason, then decode the Auth data from its base64 format. Then it's a simple matter of extracting the data. You can even pass the data to the $_SERVER variables $_SERVER['PHP_AUTH_USER'] and $_SERVER['PHP_AUTH_PW']. These are the variables that get the login data if you have PHP running as an Apache module. This is useful for mods or plugins.
web at kwi dot dk
12-Jul-2006 07:23
12-Jul-2006 07:23
While Digest authentication is still far superior to Basic authentication, there are a number of security issues that one must keep in mind.
In this respect, the Digest example given above is somewhat flawed, because the nonce never times out or otherwise become invalid. It thus becomes a password-equivalent (although to that specific URL only) and can be used by an eavesdropper to fetch the page at any time in the future, thus allowing the attacker to always access the latest version of the page, or (much worse) repeatedly invoke a CGI script -- for instance, if the user requests the URL "/filemanager?delete=somefile", the attacker can repeat this deletion at any point in the future, possibly after the file has been recreated.
And while it might not be possible to change GET data without reauthentication, cookies and POST data *can* be changed.
To protect against the first problem, the nonce can be made to include a timestamp, and a check added to ensure that nonces older than e.g. 30 minutes result in a new authentication request.
To solve the second problem, a one-time only nonce needs to be generated -- that is, all further requests using a particular nonce must be refused.
One way to do this: When the user requests an action such as "deletefile", store a randomly generated nonce in a session variable, issue a 401 authentication challenge with that nonce, and then check against the stored value when receiving the authentication (and clear the session variable).
This way, although a possible eavesdropper receives the nonce and thus gains the ability to perform the action, he can only perform it once -- and the user was going to perform it anyway. (Only the user or the attacker, but not both, gets to perform the action, so it's safe.)
Of course, at some point, the security can only be improved by switching to HTTPS / SSL / TLS (this is for instance the only way to defend against man-in-the-middle attacks). You decide the level of security.
Louis
04-Jun-2006 12:51
04-Jun-2006 12:51
I couldn't get authentication to work properly with any of the examples. Finally, I started from ZEND's tutorial example at:
http://www.zend.com/zend/tut/authentication.php?article=authentication (validate using .htpasswd) and tried to deal with the additional cases. My general conclusion is that changing the realm is the only reliable way to cause the browser to ask again, and I like to thank the person who put that example in the manual, as it got me on the right path. No matter what, the browser refuses to discard the values that it already has in mind otherwise. The problem with changing the realm, of course, is that you don't want to do it within a given session, else it causes a new request for a password. So, here goes, hopefully the spacing isn't too messed up by the cut'n'paste.
I spent the better part of a day getting this to work right. I had a very hard time thinking through what the browser does when it encounters an authentication request: seems to me that it tries to get the password, then reloads the page... so the HTML doesn't get run. At least, this was the case with IE, I haven't tested it with anything else.
<?php
session_start() ;
if (!isset($_SESSION['realm'])) {
$_SESSION['realm'] = mt_rand( 1, 1000000000 ).
" SECOND level: Enter your !!!COMPANY!!! password.";
header( "WWW-Authenticate: Basic realm=".$_SESSION['realm'] );
// Below here runs HTML-wise only if there isn't a $_SESSION,
// and the browser *can't* set $PHP_AUTH_USER... normally
// the browser, having gotten the auth info, runs the page
// again without getting here.
// What I'm basically getting to is that the way to get
// here is to escape past the login screen. I tried
// putting a session_destroy() here originally, but the
// problem is that the PHP runs regardless, so the
// REFRESH seems like the best way to deal with it.
echo "<meta http-equiv=\"REFRESH\"
content=\"0;url=index.php\">" ;
exit;
}
if ($_POST['logout'] == "logout") {
session_destroy() ;
header('Location: comeagain.php');
exit ;
}
// "standard" authentication code here, from the ZEND tutorial above.
comeagain.php is as follows:
<?
session_start();
unset($_SESSION['realm']);
session_destroy();
echo "<html><head><title>Logged Out</title><h1>Logout Page</h1><body>" ;
echo "You have successfully logged out of TOGEN";
echo " at ".date("h:m:s")." on ".date("d F Y") ;
echo "<p><a href=\"index.php\">Login Again</a>" ;
echo "</body></html>" ;
?>
The idea is to be able to trash the session (and thus reset the realm) without prompting the browser to ask again... because it has been redirected to logout.php.
With this combination, I get things to work. Just make sure not to have apache run htpasswd authentication at the same time, then things get really weird :-).
henrik at laurells dot net
01-Jun-2006 08:36
01-Jun-2006 08:36
Above top example for digest mode dosn't work if you have safemode on. You need to add a dash and UID to the compare string to make it work. Something like this;;
$A1 = md5($data['username'].':'.
$realm.'-'.getmyuid().':'.
$users[$data['username']]);
kembl at example dot com
23-May-2006 05:06
23-May-2006 05:06
# PHP (CGI mode) HTTP Authorization with ModRewrite:
# most right example with header check for non empty:
RewriteEngine on
RewriteCond %{HTTP:Authorization} !^$
RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization}, \
E=PHP_AUTH_USER:%{HTTP:Authorization},L]
cyberscribe at php dot net
08-May-2006 08:47
08-May-2006 08:47
To implement the Digest authentication mentioned above in PHP < 5.1, try prepending the following:
<?php
$headers = apache_request_headers();
$_SERVER['PHP_AUTH_DIGEST'] = $headers['Authorization'];
?>
or, if you don't like the idea of modifying the global $_SERVER variable directly, just use the first line and then substitute $_SERVER['PHP_AUTH_DIGEST'] in the sample code with $headers['Authorization']. Works great.
ZyX
04-Mar-2006 01:04
04-Mar-2006 01:04
Simple PHP Script to login on a Basic Authentication page.
<?php
/* Access Configuration */
define ('x401_host', 'www.example.com');
define ('x401_port', 80);
define ('x401_user', 'your_username');
define ('x401_pass', 'your_password');
/* Function */
function get401Page($file) {
$out = "GET $file HTTP/1.1\r\n";
$out .= "Host: ".x401_host."t\r\n";
$out .= "Connection: Close\r\n";
$out .= "Authorization: Basic ".base64_encode(x401_user.":".x401_pass)."\r\n";
$out .= "\r\n";
if (!$conex = @fsockopen(x401_host, x401_port, $errno, $errstr, 10))
return 0;
fwrite($conex, $out);
$data = '';
while (!feof($conex)) {
$data .=